Internet Connection Sharing allows an 802.11 card and a cell phone, laptop wireless internet card to use. USB internet laptop cards are for more than laptops. Sometimes they are the main access point for an internet business or home. In these cases, there may be other computers or devices, Internet access, and should be. With Internet Connection Sharing, can these devices to the Internet via the Ethernet port to connect the main computer. The computer can be setas a router or a bridge to fill the ICS or the connection.
The easiest way is to use Internet Connection Sharing. Open Network Connections in Control Panel with the right mouse button on the notebook tab, select "Allow network users on this computer for the Internet connection." Advanced Configuration and use of the card, set the check box labeled Advanced Settings Then click on the box, check all the servicesto share. If you do not know, just check them all.
Wireless Network Bridge
ICS makes the main computer as a router. There are IP addresses on the local network to any device you plug in. There are the easiest way, just turn it and it works. In some cases it may cause a problem for the device to that of a secondary network.
When a routing solution does not work, you can build a bridge to the main computer. The structure of a Bridge still allows sharing, but the IP is going through the same IP that was assigned to the main unit. The two devices share the same IP address. This is good if in a place that connects via a menu, as are several cafes and hotels. If you have a plug-and-play, may lack a monitor and a keyboard for you to login if you add a bridge, the plug-and-play with the same IP that the computer already received.
The > Bridge can often be a problem. The wireless card often refuse to cooperate, and you will end up having to do some work with outsiders. To set the bridge, check the connection you want to connect. Then select "Advanced" and "Bridge Connections". It takes time to build the bridge, and much more, if you delete it. deciding Once established, the second device should be able to share the same IP as the main unit. If '> Wi-Fi in the main unit does not connect to the Internet, the next step.
Open a command prompt, type netsh bridge show adapter and this will show the number of Wi-Fi adapter. We want to enable the power mode compatibility for the wireless adapter. Condition that there is an adapter, the command would be netsh bridge set to 1 and 'the system to activate a set of adapters. After this command, the command does not show againbe sure that the change has taken place. Then the wireless connection should work.
This is great stuff, as long as you do not expect it to run faster as a router solution. If you set up a permanent home or corporate network, you can call your phone company router recommendation. Expect to pay about $ 100 - $ 200 for a router that can use an air card for a WAN.
Share Internet from a laptop card with ICS or bridgewireless network bridge
Bedbug Bite Photos Universal Camera Remote Control Pentax Bedbug Dust